How to use the Ping command on Linux?

Are you looking for information on how to use the Ping command in Linux? Great! You’ve come to the right place. Why? Because we will explain this in this article. In addition, we will discuss why it is beneficial and how to install it. So, let’s start.

What does the Ping command stand for?

The Ping command is a software tool to check the connectivity between two systems. Alternatively put, a host’s ability to be reached on a network.

The software designed for configuring, analyzing, maintaining or optimizing machines is known as utility software. This is because it supports the hardware of computers. In addition, all operating systems come with the Ping, a very well-liked diagnostic tool.

Additionally, Ping sends four 32-byte packets to the target by default using the ICMP protocol (Internet Control Message Protocol).

Is it beneficial? 

Absolutely yes. Why? Because with it, you can test and verify different things. Here are some of its main advantages:

  • Verify whether a particular device, such as your server, is now connected. If you can get to it, it might be possible that you and the goal are connected.
  • Check if the target responds sufficiently soon. The target can be checked and noted regularly. If the target responds more slowly than usual, there might be an issue that requires more investigation.
  • You can look at several network segments to find out if there is a bottleneck.
  • To keep an eye on the target, keep the Ping command open at all times. To make sure everything is operating smoothly, utilize this with your server.

How to install the Ping command on Linux?

Most versions of Linux ought to come with Ping preinstalled. You can verify that it is this way executing by:

ping -V

If the Ping is missing, a simple system upgrade ought to fix the issue:

apt-get update && apt-get install -y iputils-ping

How does Linux’s Ping command work?

The Ping is accessible via the Terminal on both Linux and macOS.

In Linux operating system, go to the Start menu and type “Terminal.” Then, when you find it, click on it.

Now, in the Terminal, enter the Ping command and press Enter:

ping linuxmd.net 

or

ping linuxmd.net 

In addition, you can taste the Ping command on Winwos via Command prompt.

Conclusion

Let’s recapitulate. You can now know the Ping command and how to use it. But for what? To troubleshoot network issues like high latency or dropped packages and test your internet connection. So, it’s worth a try. 

Article Writter By

Tux

Write a Comment

Your email address will not be published.